1963 hydrodyne 90 hp I/O Volvo Prop

Discussion in 'Hydrodyne® Boats' started by Mike Ross, Aug 20, 2017.

  1. Mike Ross

    Mike Ross New Hydrodyner

    Joined:
    Aug 20, 2017
    Messages:
    2
    Boat Model and Year:
    1963 hydrodyne i/p
    My buddy has a 1963 hydrodyne with a 90 HP volvo penta stern drive. He needs a prop hub for it. he is willing to buy the entire prop if he needs to. Need to find some "old heads" to help him out. The boat runs great but the hub went bad. I have attached photos he sent me of what he has.
    Michigan Wheel Brass prop


    SMC 897

    MICHIGAN 2114

    INSIDE DIAMETER 3/4 INCH

    OUTSIDE DIAMETER 3-1/3 INCH
     

    Attached Files:

  2. wentworthto1

    wentworthto1 Hydrodyner

    Joined:
    Aug 25, 2008
    Messages:
    59
    Boat Model and Year:
    1961 Hydrodyne I/O BB70
    I may have what you need. When I get home on Tuesday, I'll measure one of the nos hubs I bought and let you know. I am very confident it is the right one with twelve splines.
     
  3. Mike Ross

    Mike Ross New Hydrodyner

    Joined:
    Aug 20, 2017
    Messages:
    2
    Boat Model and Year:
    1963 hydrodyne i/p
    Thanks so much.
     
  4. wentworthto1

    wentworthto1 Hydrodyner

    Joined:
    Aug 25, 2008
    Messages:
    59
    Boat Model and Year:
    1961 Hydrodyne I/O BB70
    The hub I have is the right one. PM me with an address and we can discuss cost and shipping.
     

Share This Page