There are also a few boats out there with the MIC of RUA which were built by Riverside composites that are 20 footers. The Twin Cities River Rats have one as do we. Basically a 20' hull bottom with a 17.6 top extended. Has a thicker transom than the FPD boats and handles a bit different. River Rats have theirs tripled. Ours has twin 250 E-Tecs on it after having twin 225 Yams on it for several years and is holding up ok after 7 seasons of team use.
Interesting read. The search for information on my '74 Dyne's HIN AO730560 continues. http://www.sailingbreezes.com/Sailing_B ... cation.htm http://blogs.myspace.com/index.cfm?fuse ... =490490616 Kevin
i have a hydrodyne center console can some one tell me more about it like what size moter it takes its a 20ft boat is it a good boat bad boat should i keep it anything. And im not shure on the year
Try looking through these sections: viewforum.php?f=14 My guess is it's a flat top from your description (20' and center console). Basically a pontoon with a fiberglass boat hull.
Re: Hydrodyne Nexstar 1996 Hello togehter .. I joining you guys from Frankurt Germany , and I own a Hydrodyne Nexstar Yr 96 .. It´s a fantastic & great waterski boot . extrem fun and very reliable !! My question !! could somebody give me the Manufactur address, as I don´t find it . could somebody give me an advice where to buy the some technical parts .. like : rudderblade, the bracket in the boatschell for the rudderblade propeller ( what should I use 4 wings or 3 wings) propeller axle thanks very much & best regards Andreas from Germany
Andreas, Welcome to Hydrodyners. The Hydrodyne boat company no longer exists. The name now belongs to the Calabria Boat Company and they may be able to help you. Their contact information is as follows: http://www.calabriaboats.com/ http://calabriaboats.com/index_files/Page406.htm Go here to see the proper terminology: http://www.glen-l.com/inboard-hdw/hdw-description.html These people might be able to help also: http://www.boatdesigns.com/departments.asp?dept=35 I would check with Calabria first. I am sure that I can find more sources for v-drive parts if those don't work out for you. jim
Hi Jim thanks very much for your reply.. I will contact the Calabria boats .. as as well the link with the spare parts are very usefull ! thanks a lot andreas
