Look for a hull identification number. Usually on the rear side of the transom. It's value is about the same as someone else in your area is...
I am not great with the years on these, but there may be a hull identification number somewhere on the boat that should help with that. Usually...
I hope the lower unit issues gets resolved relatively painlessly. It is a world of difference when you get the motor height set properly. I...
My guess is that when you begin to trim so the cavitation plate is beginning to angle up, it is doing two things. Most importantly, it is pushing...
If your cavitation plate is below the water at speed, you may want to consider raising the motor a hole or two. This will give you more speed,...
Thanks for the update. Will be watching this when the time comes for a new hull.
http://www.hydrodyners.com/forum/index.php?threads/2017-legacy-by-d-and-s-marine.3097/#post-12960 Some shots of the boat from Nationals last year....
And haul ass it will. The real fun part about these boats is not necessarily the speed. It is the handling. And that handling is greatly...
I should state that I am not sure if the Rock Aqua Jays use 20" or 25" lower units. They have jack plates, that is all I know. On an 18' dyne, a...
20' hydrodyne? I know the Rock Aqua Jays use jackplates on their triples, and seem to have excellent results. Why the difficulty finding a 20"...
Great shots, and a really impressive boat up close. Glad I had the opportunity to look at it during Nationals. Any updates from the Aqua Jays...
If anyone is looking for an aluminum tracking fin, I saw one available at Show Ski Nationals this weekend. Made by the guys at KW Show Ski...
If you use the search function on this site, a search for Curt Gowdy will bring up a few other posts related. From what I recall, that was...
I do not believe I ever got pictures of the first one with the curve. I only had it a couple weeks before it went swimming. It is essentially...
You actually can mount that one to the pylon as well by flipping the boom over so the mount end will be up higher, and the curve will sit on the...
http://www.hydrodyners.com/forum/index.php?threads/barefoot-boom.1725/#post-9483
KW Show ski equipment should be able to provide a barefoot boom that works with what you have for a pylon right now. I know you can order through...
Maybe he was measuring to the back of the lower unit? Was hoping you really did have a 20' with a custom deck though.
How wide is this 20' long 18' boat? The actual 18' versions are significantly narrower than the 20's. I believe the18's are just over 6' wide...
Tom was using the mold that Skip owned. No clue what happened to that one. Maybe Skip still owns it?
Separate names with a comma.
