All Hydrodyne boats that run into the mid 50's usually require only a little trimming up to obtain this performance. This sounds like bow steer....
I'll remind everyone that cares that this is not a high priority project as we are busy quoting prices on new boats, building boats, fixing boats...
This post reminds me of two sayings that friends told me about used "boats"" When they bought a used boat they realized that "BOAT" stands for...
The floor was removed by the previous owner. The boat is a basket case. I'll try and take some pictures to post soon.
Must Skis Motors has excellent and cheap suggestions. Stringers in a Hydrodyne were used to support the floor and nothing else so adding...
I picked up another well used outboard 18' Hydrodyne. It is a basket case. It needs everything although the hull seems solid. So this one I'm...
Evinrude E-Tec motors are almost self winterizing. Depending upon the style of control the instructions are slightly different and easily done by...
Power Assist is also available for Teleflex Hydraulic Steering.
Check it out. Bet you'd like one of these?
Here is a picture of the boat in Wisconsin during the on water testing.
Dyna-Ski could build a twin motored 20' Open Bow. All it will take is a bunch of money! Boat will handle like a triple due to the rear mounted...
Old boats are a "hole surrounded by water into which one pour money". My neighbor told me that "boat" stands for "break out another thousand" . ....
The 17.6 XB Hydrodyne was produced by Hydrodyne (Three Rivers Industry) starting in 1986 thru 1991. The hull mold used to produce the 17.6 Open...
Separate names with a comma.
